The best PC cases are often overlooked when it comes to building a new rig. Why spend cash on a fancy box when you could use that money for a better GPU? However, they should be one of the first things you consider for 3 important reasons. To begin with, they dictate which components you'll be able to use. To an extent, anyway; a huge graphics card may not fit into a smaller case, for instance. Secondly, they control air-flow through your rig to make sure it doesn't overheat. Your pride and joy catching fire kinda takes the fun out of it. Finally, they look damn cool. Alright, so that last bit isn't strictly relevant. But the point is, you don't want an eyesore on your desk if you're going to be spending lots of time with it.
Jargon buster
Full tower: Large, roomy goliaths built for the best kit.Mid-tower: A good all-rounder that ticks all the boxes.Mini-ITX: Small and compact. No space is wasted.Quiet: Championing silence over everything else.
Luckily, the best PC cases can be divided into 4 categories for easy browsing: full tower, quiet, mid-tower, and mini-ITX. As such, the ideal choice for you will depend on what you want it to do. Full towers are the biggest and give a lot of room for bulky components or cable management. Mid-towers are a little smaller, while mini-ITX cases stuff as much horsepower as possible into the smallest space. As for quiet cases… well, you can probably figure that one out for yourself.
No matter what you're after, you'll find something to suit you here. Our experts have thoroughly tested the best PC cases, and only the cream of the crop are available below. To save you a bit of money along the way, we've also included the top bargains and savings on each one.
Best CPU for gaming | Best graphics card | Best gaming motherboardsBest SSD for gaming | Best DDR4 RAM | Best gaming monitors
The best full tower PC case in 2019
Form Factor: Full tower | Motherboard Support: Mini-ITX, Micro-ATX, ATX, E-ATX (Support 12" x 11") | Dimensions: 639 x 306 x 651mm | Weight: 22.2 kg | Radiator Support: 120mm; 140mm; 240mm; 280mm | I/O Ports: 1 x Audio/Mic, 1 x USB 3.1 Gen 2 Type-C, 4 x USB 3.0 | Drive Bays: 2.5": 2, 3.5": 8
Integrated RGB lighting system
Adjustable motherboard layout
May require PSU extension cables
Lots of plastic
Much like the original Cooler Master Cosmos, the C700P is a hefty beast with a similarly large price-tag. However, we'd argue that it's worth the expense. A beautiful handlebar design, curved glass panel, and sleek color-scheme are matched by features that'll support even the most high-end components (including E-ATX motherboards and oversized GPUs). A larger footprint mean that you won't be pushed for space either. What's more, understated RGB lighting also means it's not going to distract you while you game. Yes, this is a lot to spend on an enclosure. However, those who are willing to go all out on a build will get a case with every tool they need to create a stunning PC.
Want more full tower recommendations? See our guide to the best full tower case.
The best mid-tower PC case
Form Factor: Mid tower | Motherboard Support: Mini-ITX, MicroATX, ATX and EATX(Up to 272mm or 10.7-inches) | Dimensions: W: 230mm H: 516mm D: 494mm | Weight: 12.27 kg | Radiator Support: Front: 2 x 140mm or 3 x 120mm with Push/Pull, Top: 2 x 140mm or 3 x 120mm, Rear: 1 x 120mm | I/O Ports: 2 x USB 2.0, 2 x USB 3.1 Gen 1, 1 x Audio/Mic | Drive Bays: 2.5": 7, 3.5": 2+1
Integrated addressable LED lighting
CAM powered "smart device"
No USB Type-C
Cramped HDD space
One of our latest favorites is NZXT's H700i, released in 2017. The ease of building in it and the satisfaction it provides are second to none. NZXT markets the H700i as a "smart" case thanks to the inclusion of a new smart hub powered by the company's CAM software.
This hub acts as both a digital fan controller and a RGB LED controller that uses machine learning to find the perfect balance between noise and cooling for your fan speeds in real-time. The H700i generously includes four pre-installed fans and two RGB strips to make full use of the smart hub out of the box.
These features already set the H700i apart from the crowd, but the cable management on the backside is the star of the show. Four different cable routing channels with integrated cable tie downs made the process effortless and extremely satisfying. Priced at $200, the H700i is one of the more expensive cases we've recommended but it's about as premium as it gets.
Fancy more cases like this? Check out our list of the best mid-tower cases.
The best mini-ITX PC case
Form Factor: Mini-ITX tower | Motherboard Support: Mini-ITX and microATX | Dimensions: W: 210mm H: 349mm D: 372mm | Weight: 6.0 kg | Radiator Support: 120mm, 240mm | I/O Ports: 1 x Audio/Mic, 2 x USB 3.1 Gen 1 | Drive Bays: 2.5": 4, 3.5": 1
Excellent cooling support
Pre-installed addressable RGB lighting
Integrated CAM smart device
Airflow isn't too great
NZXT's H200i is essentially a miniaturized version of our favorite mid tower, the H700i. Built to support mini-ITX builds, the H200i is all about packing a high end system into a compact, minimalistic package.
Like its bigger brother, the case comes equipped with NZXT's smart hub and also includes two fans and one RGB LED strip. With plentiful support for liquid cooling and full sized components, the H200i is the perfect compromise between smaller ITX builds and larger mid-sized towers.
If mini-ITX is your thing, see more recommendations in this guide to the best mini-ITX cases.
Form Factor: Mid Tower | Motherboard Support: Mini-ITX, Micro-ATX, ATX | Dimensions: 456 x 207 x 520mm | Weight: 9.3 kg | Radiator Support: 120mm; 140mm; 240mm; 280mm | I/O Ports: 1 x Audio/Mic, 2 x USB, 3.0 1 x USB 2.0 | Drive Bays: 2.5": 3 3.5": 5
Silent
Affordable
Solid build
Generic appearance
Sometimes having a quiet PC case is more important than anything else. Whether you're playing some PC games, or just trying to chill and watch some Netflix, having a quiet PC can be a game changer. And, that's why we love the Nanoxia Deep Silence 3.
Now, this PC case isn't much to look at. It's a plain, black metal box, and that might not be too exciting. But, it's what's beneath the surface that counts. Behind the closed front of the case is noise isolating foam that'll stop any noise dead in its tracks. That means even if you have an extremely loud Nvidia GeForce RTX 2080 Ti like we do, it won't be too obnoxious.
And, there's plenty of room for expansion, too. You can fit up to five 3.5mm hard drives, and if you have an extra-long graphics card you can remove one of the hard drive bays to fit even the longest graphics cards.
Form Factor: Mid tower | Motherboard Support: Mini-ITX, Micro-ATX, ATX | Dimensions: 460mm x 211mm x 455mm | Weight: 10.14 kg | Radiator Support: 120mm; 140mm; 240mm; 280mm; 360mm | I/O Ports: 1 x Audio/Mic, 2 x USB 3.0 | Drive Bays: 2.5": 3 3.5": 2
Minimal branding
Full-length dust filters
Great cooling support
Lacking cable management space
One of Corsair's newest cases, the Carbide 275R might just be the ultimate minimalist's case. Aside from a small "sail" logo on the front panel, the 275R ditches additional branding for the sake of a clean design that anyone can respect. While the design may be minimal, the functionality is anything but.
Unlike NZXT's minimal S340, the Carbide 275R can support a 360mm radiator in the front and up to a whopping six 120mm fans. With a modest $80 price tag, the 275R is a great case for beginners as well as advanced users looking to create a sleek custom loop.
The best high-end PC case
Form Factor: Super tower | Motherboard Support: ATX, Extended ATX, Mini-ITX, SSI EEB, microATX | Dimensions: 27.4 x 12.1 x 27.3 inches | Weight: 29.5kg | Radiator Support: 120mm; 140mm; 240mm; 280mm; 360mm; 420mm; 480mm | I/O Ports: 1 x Audio/Mic, 4 x USB 3.0, 2 x USB 3.1 Type-C | Drive Bays: 2.5": 6 3.5": 5
Supports just about any crazy build
Can house an E-ATX and Mini-ITX build at the same time
Supports dual 480mm front radiators
Expensive
Speaking of roomy builds, the Corsair Obsidian Series 1000D is a behemoth of a PC case ready to house the biggest and baddest systems. Standing tall at a staggering 27.3", this "super tower" features enough space to house 18 fans and up to four massive radiators installed simultaneously.
In addition to the insane cooling support, the 1000D features a unique triple-chamber design with convenient french-door-styled storage compartments and telescoping radiator trays for easy installation. Because it is 2019 of course there is also an RGB lit front panel I/O with built-in smart lighting and fan control courtesy of Corsair's built-in Commander Pro controller. The Obsidian 900D has long been a top choice for massive, over-the-top builds and it's only fitting that the 1000D was designed to knock it off its throne.
Form Factor: Mid tower | Motherboard Support: Mini-ITX, MicroATX, ATX | Dimensions: 500mm x 237mm x 507mm | Weight: 11.75 kg | Radiator Support: 120mm, 140mm, 240mm, 280mm, 360mm | I/O Ports: 1 x USB 3.1 Type-C, 2 x USB 3.0, 1 x Audio/Mic | Drive Bays: 2.5": 3 3.5": 2
Brilliant RGB lighting
Easy cooling installation
Not much cable management space
Corsair's Obsidian 500D took everything we loved about the 900D added a ton of modern updates and brought it to a smaller more accessible mid tower. Like its predecessors, the 500D offers an elegant blend of smoked tempered glass and brushed aluminum for a truly premium look and feel.
As expected from a modern Corsair case, the 500D and the newer 500D SE offers plentiful support for liquid cooling and convenient cable management options. The latter replaces the aluminum front panel with more smoked tempered glass and features a built in version of Corsair's RGB LED/fan controller along with three pre-installed addressable RGB LED fans. The end result is an iconic enclosure that is as beautiful as it is functional.
Look to buy either the 500D or the 500D SE to suit whatever you really need. The regular model is brilliant, and widely available, but the SE adds some lovely RGB lighting and costs significantly more.
The best case for modders
Form Factor: Full tower | Motherboard Support: E-ATX, XL-ATX, ATX, M-ATX, Mini-ITX | Dimensions: 577 x 243 x 586 mm | Weight: 14.39 kg | Radiator Support: 120mm, 140mm, 240mm, 280mm, 360mm, 420mm | I/O Ports: 1 x Audio/Mic, 2 x USB 3.0, 1 x USB 3.1 Gen 2 Type C, Qi Wireless Charger | Drive Bays: 2.5": 10 3.5": 5
Highly modular
Wireless Qi charger
Extensive cooling support
Expensive
Originally known for their silent power supplies and fans, be quiet! entered the case market with a big splash and has done quite well in the short period of time since their first case launch in 2014. One of their newer cases, the Dark Base Pro 900 remains one of our highly recommended full towers thanks to its sleek design and enthusiast-friendly interior.
The Dark Base Pro 900 is large enough to support the biggest motherboards and radiators up to 420mm in size. The case also features total modularity with options for an inverted motherboard layout and even some nifty features like wireless qi charging and preinstalled LED lighting.
The best case for Razer cultists
Form factor: Mid tower | Motherboard Support: E-ATX, ATX, M-ATX, mini-ITX | Dimensions: 446 x 272 x 445mm | Weight: 9.7kg | Radiator Support: 120mm, 240mm, 280mm, 360mm | I/O Ports: 2 x USB 3.0, 2 x HD audio, 1 x USB 3.1 Type-C | Drive bays: 2.5": 6 3.5": 3
Synapse 3-compatible lighting
Plenty of headroom for upgrades
Poor instructions
The worst we can say about the Lian-Li PC-011 Dynamic is that its instruction manual is incomprehensible. If you already know how to build a PC, however, piecing it together shouldn't prove too difficult.
For the most part, it's a standard tempered glass mid-tower case with a few bells and whistles to make it all worth the enduring trial and error of the PC building experience. For one, it has three removable panels—one on the front and one on each side. Naturally, this makes for an easy installation. Incorporating a liquid cooler in its exposed ceiling area is an effortless undertaking.
Once everything is in place, assuming you have the coveted Razer Edition of the PC-011 Dynamic, you can get started customizing lighting schemes in the tri-snake compnay's Synapse 3 software, coordinating it with your other Razer peripherals along the way.
Form Factor: Mid tower | Motherboard Support: Mini-ITX, Micro-ATX, ATX, E-ATX (support upto 12" x 10.7") | Dimensions: 544 x 248 x 546mm | Weight: 14.2 kg | Radiator Support: 120mm, 140mm, 240mm, 280mm, 360mm | I/O Ports: 1 x USB 3.1 Type-C, 2 x USB 3.0, 1 x Audio/Mic | Drive Bays: 2.5": 3 3.5": 2
It's massive (supports E-ATX)
High airflow with 2x 200mm RGB fans
No magnetic dust filters
Expensive
Cooler Master's H500M is the company's latest flagship mid tower, but we'd really rather it be called a full-sized tower. Measuring 21.4 x 9.8 x 21.5 inches, the H500M is the biggest mid tower on this list. Thanks to its large size and internal layout, it's really easy to build in and supports a huge variety of components and custom cooling options.
The H500M comes with two massive 200mm RGB LED fans installed which do a fantastic job of increasing airflow out of the box. Other modern touches include a USB 3.1 Type-C connector and tons of modularity including the option to choose between mesh and tempered glass.
Our only major issue with the case is the lack of easily removable magnetic dust filters for the front fan intake. Luckily, all of the mesh in the entire H500 line features a secondary filter layer that'll help keep dust out of your build.
Some online stores give us a small cut if you buy something through one of our links. Read our affiliate policy for more info.
0 comentários:
Postar um comentário